Italiano
TEMPERO ECO V E BPCentralized heat recovery unit
FEATURES
- Heat Recovery Unit with counterflow heat exchanger for VERTICAL installation.
- High thermal efficiency: heat exchanger > 90%.
- Plug Fan with EC centrifugal brushless motors, high performance, low energy consumption.
- Equipped with synthetic fiber class G4 filters (F7 optional on fresh air).
- Self-supporting structure made of EPS material with outer coat painted steel.
- Drip tray to condensate drainage.
- Suitable for VERTICAL installation.
- Equipped with automatic BY-PASS.
- Adjustable speed through wireless controller (included).
- In Compliance with ERP 2018 Directive.
IN EVIDENCE
MAXIMUM INSTALLATION COMFORT
TEMPERO ECO V E BP is particularly suitable for installation in vertical position in closets, laundry, etc.
90% MAXIMUM EFFICIENCY
TEMPERO ECO V E BP allows to achieve a high degree of efficiency in terms of energy recovery, thanks to a counter flow heat exchanger: when outside temperature is -2°C and internal temperature is 21°C, the air blown into the room will be around 19°C.
E BP (BY-PASS) VERSION
When recovering the heat of the extracted air is not convenient, for example in summer, the By-Pass allows to use TEMPERO ECO IL E BP thus avoiding the extracted air to cross the heat exchanger.
ELECTRONIC COMMUTATED BRUSHLESS MOTORS (EC)
The Electronically Commutated Brushless technology allows the two engines of TEMPERO ECO IL E BP to reach a high energy saving and a long life granted by ballbearing motor.
FILTERS WITH A HIGH DEGREE OF FILTRATION
Both the fresh and the extracted air are filtered through synthetic fiber class G4 filters. (F7 optional on fresh air. This filter grants to keep the environment protected from air impurities). Two synthetic fiber class G4 filters, ensure a high degree of filtration both on the incoming fresh air and the extracted air.
EVERYTHING UNDER CONTROL
Dedicated wireless controller (RG IL-V) supplied with the product, with four modes of operation: “Away” (low speed), “Home” (medium speed), Party (speed at 100%) and “Timer” (high speed for 30, 60 or 90 minutes). The practical operating light (LED) is a fast and useful indication for the maintenance of the filters when becoming necessary. Two optional control panels, having all the above features with a LED status for each mode, allow to keep some important values under control, such as the humidity level (RG IL-V HR and RG IL-V CO2) or the CO2 level (RG IL-V CO2) and they eventually force air extraction in case the level is arising above the pre-set threshold. The panel is equipped with a practical soft touch which allows to change modes or to set various levels of Humidity or CO2.
DIMENSIONS
Product versions
Slide the table to the right
| Model | Code | Voltage (V) | Frequency (Hz) | Flow rate (m³/h) | Max. Press. (Pa) | Power (W) | Noise dB(A)3m | Weight (Kg) | Ø tubes (mm) | Useful capacity (mm H₂O) | Nom. curr (A) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | Code | Voltage (V) | Frequency (Hz) | Flow rate (m³/h) | Max. Press. (Pa) | Power (W) | Noise dB(A)3m | Weight (Kg) | Ø tubes (mm) | Useful capacity (mm H₂O) | Nom. curr (A) |
| TEMPERO ECO V 250 E BP | 0068920 | 230 | 50 | 225 | 100 | 86 | 35,8 | 37 | 125 | 10,2 | 0,64 |
| TEMPERO ECO V 450 E BP | 0068950 | 230 | 50 | 370 | 100 | 166 | 38,5 | 41 | 160 | 14,3 | 1,5 |
